5386 SPN Fault Code

Name:

Engine Turbocharger Wastegate Actuator 1 Command

Description:

The command to a Turbocharger Wastegate actuator 1, normalized to percent, where 0% nominally represents fully closed (No Flow) and 100% represents fully open (Max Flow).FB00h – FB64h is sent to calibrate to a specific position. The LSB specifies the position with a resolution of 1%/bit (eg, FB32h is sent to calibrate the actuator to 50%). FBFFh is sent to calibrate the actuator using its own algorithm. Calibration status from the actuator is received on SPN 5451.

5386 spn fault code name is Engine Turbocharger Wastegate Actuator 1 Command. If you don't take the time to look into 5386 spn fault when it arises, it can add up quickly. One small issue like 5386 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 5386 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Similar SPN Codes :

Truck List With 5386 SPN Code :

SPNFMI Faults and Engine error code check tool. SPN code listing with names and descriptions.

About Us | Contact | Privacy

Copyright 2021 - © SPNFMI.com