6730 SPN Fault Code

Name:

Engine Fan 2 Requested Percent Speed

Description:

Fan speed of the second fan in the system as a ratio of the actual fan drive (current speed) to the fully engaged fan drive (maximum fan speed). A two state fan (off/on) will use 0% and 100% respectively. A three state fan (off/intermediate/on) will use 0%, 50% and 100% respectively. A variable speed fan will use 0% to 100%. Multiple fan systems will use 0 to 100% to indicate the percent cooling capacity being provided. Feedback to this request is provided using the Estimated Percent Fan 2 Speed (see SPN 1550).Note that the intermediate fan speed of a three state fan will vary with different fan drives, therefore 50% is being used to indicate that the intermediate speed is required from the fan drive. Typically, the first fan in a system will be the fan closest to the radiator. The second fan will be located farthest from the radiator. SPN 986 shall be used for systems that have only one fan.

6730 spn fault code name is Engine Fan 2 Requested Percent Speed. If you don't take the time to look into 6730 spn fault when it arises, it can add up quickly. One small issue like 6730 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 6730 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

6730 SPN Fault Code

Name:

Description:

Similar SPN Codes :

Truck List With 6730 SPN Code :