Eicher Pro 6041 2878 SPN Fault Code

Name:

Operators Desired Back-light

Description:

A 8 bit parameter to indicate the level of back lighting the operator has selected for displays. This is to be differentiated from the Illumination Brightness Percent (SPN:1487 PGN:53248 Cab Illumination Message) which is sent to the displays to tell them what level to be at. This is the operator desired level (as sensed by operator controls) for those system where the operator controls are monitored by an ecu separate from the ecu sending the command to the displays. Note each display (if appropriate) will need to have its own balance function to compensate its nominal brightness to the same level of that of all other displays. This is especially important for systems with back-lights which may change noticeable with aging. In other words it will be necessary within a vehicle to scale all of the displays down to the same level as the dimmest display (since, obviously you can not make the dimmest brighter).

Eicher Pro 6041 2878 spn fault code name is Operators Desired Back-light. If you don't take the time to look into Eicher Pro 6041 2878 spn fault when it arises, it can add up quickly. One small issue like Eicher Pro 6041 2878 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Eicher Pro 6041 2878 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Eicher Pro 6041 2878 SPN Fault Code

Name:

Description:

Similar SPN Codes :