Hino 500 FL8J 7038 SPN Fault Code

Name:

Transmission Override Control Mode Priority

Description:

This field is used as an input to the transmission to determine the priority of the Override Control Mode received in the Torque/Speed Control message. The default is 11b (Low priority). It is not required to use the same priority during the entire override function.The four priority levels defined are: 00b = Highest priority 01b = High priority 10b = Medium priority 11b = Low priority 00b � Highest Priority = Used for situations that require immediate action by the receiving device in order to provide safe vehicle operation. This level of priority should only be used in safety critical conditions. 01b � High Priority = Used for control situations that require prompt action in order to provide safe vehicle operation. 10b � Medium Priority = Used for powertrain control operations which are related to assuring that the vehicle is in a stable operating condition. 11b � Low Priority = Used to indicate that the associated command desires powertrain control but is needed for function which m

Hino 500 FL8J 7038 spn fault code name is Transmission Override Control Mode Priority. If you don't take the time to look into Hino 500 FL8J 7038 spn fault when it arises, it can add up quickly. One small issue like Hino 500 FL8J 7038 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Hino 500 FL8J 7038 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Hino 500 FL8J 7038 SPN Fault Code

Name:

Description:

Similar SPN Codes :