International Lonestar SFA 6807 SPN Fault Code

Name:

Engine Desired Torque Request

Description:

This is the torque that the ECM desires to provide. It is a request made from the ECM to an external system. A valid value within the operating range indicates the engine is requesting an external controller to change the operation of the system so the engine can achieve a specific torque. This will most likely be accomplished by managing the load to the engine, but it is not limited to this method. A value of FBh indicates that the parameter is supported but there is no specific torque being requested by the engine.This parameter is in indicated torque as a percent of the reference engine torque. See PGN 65251 for the engine configuration message. Any change in torque as a result of this parameter would be reflected in SPN 513. In the event that an ECM transmits a valid value within the operating range for this parameter and a non-zero value for SPN 3644 at the same time, then the receiving controller should honor SPN 3644 and ignore this parameter.

International Lonestar SFA 6807 spn fault code name is Engine Desired Torque Request. If you don't take the time to look into International Lonestar SFA 6807 spn fault when it arises, it can add up quickly. One small issue like International Lonestar SFA 6807 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of International Lonestar SFA 6807 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

International Lonestar SFA 6807 SPN Fault Code

Name:

Description:

Similar SPN Codes :