Scania G 280 1380 SPN Fault Code

Name:

Engine Oil Level Remote Reservoir

Description:

Ratio of current volume of engine oil in a remote reservoir to the maximum required volume. If a single switch (on/off) is used, 20% and 100% respectively will be used where 100% means no oil needs to be added and 20% means oil needs to be added. If two switches are used, 20%, 50%, and 100% will be used where 20% indicates the oil is critically low, 50% indicates the oil level is low, and 100% means no oil needs to be added. For continuous sensors, the actual measured percent will be used.

Scania G 280 1380 spn fault code name is Engine Oil Level Remote Reservoir. If you don't take the time to look into Scania G 280 1380 spn fault when it arises, it can add up quickly. One small issue like Scania G 280 1380 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Scania G 280 1380 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Scania G 280 1380 SPN Fault Code

Name:

Description:

Similar SPN Codes :