Scania L 280 2888 SPN Fault Code

Name:

Engine Alternate Rating Select State

Description:

This parameter reflects the control state that has been achieved based on the input from the SPN 2882. In some off-highway applications it may be desirable to have multiple engine ratings available for selection by the operator. There is the default engine rating, which provides the maximum available power across the range of operation. There are additional engine ratings which the engine controller may use that allow for alternate fueling across the operational range. Engine rating number 1 is the maximum rating. Rating number 2 is the next highest, rating 3 next highest, etc.00h = Control state is Maximum Power Fueling 01h = Control state is Alternate Power Fueling 1 02h = Control state is Alternate Power Fueling 2 03h = Control state is Alternate Power Fueling 3 04h to FDh = Control state is Alternate Power Fueling 4 thru 253 (in sequential order) FEh = SAE reserved FFh = Not available

Scania L 280 2888 spn fault code name is Engine Alternate Rating Select State. If you don't take the time to look into Scania L 280 2888 spn fault when it arises, it can add up quickly. One small issue like Scania L 280 2888 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Scania L 280 2888 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Similar SPN Codes :

SPNFMI Faults and Engine error code check tool. SPN code listing with names and descriptions.

About Us | Contact | Privacy

Copyright 2021 - © SPNFMI.com