Scania P 280 5605 SPN Fault Code

Name:

Cruise Control Pause Command

Description:

This parameter is used to temporarily disable cruise control from a source other than the driver controlled switch if cruise control is active. If this parameter is used to disable cruise control, then cruise control will not need to be re-initialized and the previous set speed will be retained. In order for the cruise control system to resume to the previous set speed, a valid command must be received. Valid commands include (1) the Cruise Control Resume Switch (SPN 601), (2) the Cruise Control Set Switch (SPN 599), or (3) Cruise Control Resume Command (SPN 5604).This parameter has priority over Cruise Control Resume Command (SPN 5604). See Figure PGN2560_A for an explanation of how this relates to other parameters. This parameter is not the physical switch that is used to pause cruise control. See SPN 1633 for the physical switch. Receiving this parameter to disable cruise control has the same effect on cruise control as tapping the brake pedal. 00b = Cruise Control is allowed 01b =

Scania P 280 5605 spn fault code name is Cruise Control Pause Command. If you don't take the time to look into Scania P 280 5605 spn fault when it arises, it can add up quickly. One small issue like Scania P 280 5605 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Scania P 280 5605 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Scania P 280 5605 SPN Fault Code

Name:

Description:

Similar SPN Codes :