Scania S 620 1849 SPN Fault Code

Name:

Transmission Requested Range Display Flash State

Description:

State signal indicating a transmission request for the display of the Transmission Requested Range parameter (SPN 162) to flash or not to flash. The �Transmission Requested Range Display Flash State� indicator can be utilized by (but not limited to) the shift console, instrument cluster, or cab display. Definition of the cause of this state is at the discretion of the transmission manufacturer. The flash period shall be 700 ms @ 50% duty cycle.Transmission manufacturers may want to flash the Transmission Requested Range display depending on certain events. It could be because a gear could not be attained, or because fluid is low, etc. Indicator should be on for 350 ms and off for 350 ms. Transmissions supporting both this parameter and the Transmission Requested Range Display Blank State should treat the active states of these parameters as mutually exclusive; both parameters should not indicate � active � at the same time. 00b = Inactive; Transmission Requested Range display should no

Scania S 620 1849 spn fault code name is Transmission Requested Range Display Flash State. If you don't take the time to look into Scania S 620 1849 spn fault when it arises, it can add up quickly. One small issue like Scania S 620 1849 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Scania S 620 1849 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Scania S 620 1849 SPN Fault Code

Name:

Description:

Similar SPN Codes :