Scania T 420 695 SPN Fault Code

Name:

Engine Override Control Mode

Description:

The override control mode defines which sort of command is used: 00b = Override disabled – Disable any existing control commanded by the source of this command. 01b = Speed control – Govern speed to the included « desired speed » value. 10b = Torque control – Control torque to the included « desired torque » value. 11b = Speed/torque limit control – Limit speed and/or torque based on the included limit values. The speed limit governor is a droop governor where the speed limit value defines the speed at the maximum torque available during this operation. If a device wants to know whether it has access to the engine, there are several possibilities: a. Comparing its command with the actual engine broadcasts. b. Looking at command modes from other devices. c. Looking to the engine and retarder torque mode. Remarks: a. The realization of a torque limit (minimum selection) is possible by setting Engine Override Control Mode = 11b (speed/torque limit control) and the speed limit to a high va

Scania T 420 695 spn fault code name is Engine Override Control Mode. If you don't take the time to look into Scania T 420 695 spn fault when it arises, it can add up quickly. One small issue like Scania T 420 695 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Scania T 420 695 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Similar SPN Codes :

SPNFMI Faults and Engine error code check tool. SPN code listing with names and descriptions.

About Us | Contact | Privacy

Copyright 2021 - © SPNFMI.com