1751 SPN Fault Code

Name:

Nominal Level Request Front Axle

Description:

Command signal to activate a level of the front axle programmed and/or memorized in the ECU For explanations of nominal level see SPN 1734 � Nominal Level Front Axle.0000b = No level request 0001b = Normal Level 1,(i.e. the level prescribed for normal driving, given by design) 0010b = Normal Level 2,(i.e. a level permitted for driving, for example to lower the vehicle in case of high speed) 0011b = Normal Level 3,(i.e. a level permitted for driving, for example to lift the vehicle in case of offroad) 0100b = Preset Level,(i.e. a level to be defined externally via CAN) 0101b = Customer Level,(i.e. a level to be defined by customer via parameter setting) 0110b = Upper Level,(i.e. the highest level to be controlled) 0111b = Lower Level,(i.e. the lowest level to be controlled) 1000b = Stop level change,(i.e. the level change in process shall be stopped immediately) 1001b = Raise Request (Continuously raising front axle, as long as active). 1010b = Lower Request (Continuously lowering front

1751 spn fault code name is Nominal Level Request Front Axle. If you don't take the time to look into 1751 spn fault when it arises, it can add up quickly. One small issue like 1751 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 1751 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

1751 SPN Fault Code

Name:

Description:

Similar SPN Codes :

Truck List With 1751 SPN Code :