3157 SPN Fault Code

Name:

Desired Grade Offset Switch

Description:

Indicates the grade offset switch state the user has set for the land leveling system. The desired grade offset value is the vertical offset measured from a given elevation reference point to the bottom edge of the blade. This parameter is intended for use in systems using only elevation offset to control the blade movement (i.e. elevation). Systems using two independent parameters to control blade position, i.e. one edge maintains a constant elevation and the other blade edge maintains a constant angle, should use parameters specific to that usage. Only one of the following states will be active at a time. Below are the data values defined for each switch type that may be used in this application. The purpose of the following switch information is to define what data should be reported based on what type of switch is used.1. The momentary rocker switch may be used, where the default is the no button pressed position. The user can press the rocker into the increment button pressed posi

3157 spn fault code name is Desired Grade Offset Switch. If you don't take the time to look into 3157 spn fault when it arises, it can add up quickly. One small issue like 3157 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 3157 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

3157 SPN Fault Code

Name:

Description:

Similar SPN Codes :

Truck List With 3157 SPN Code :