3338 SPN Fault Code

Name:

Side-shift Blade Control Mode Operator Control

Description:

This parameter indicates the side-shift offset operator control state the user has set for the land leveling system. When an implement moves in a side-shift direction, it moves from side to side, usually along its longitudinal axis. The desired side-shift offset value is the offset measured from a given vertical reference point to the center of the blade.Only one of the following states will be active at a time. In the example below, the data values are defined for each switch type that may be used in an application. The purpose of the following switch information is to define what data should be reported based on what type of switch is used. 1. The momentary rocker switch may be used, where the default is the neutral position with no buttons pressed. The user can press the rocker into the increment button pressed position, and when pressure is released, it will return to the neutral position. The user may also press the rocker into the decrement button pressed position, and when press

3338 spn fault code name is Side-shift Blade Control Mode Operator Control. If you don't take the time to look into 3338 spn fault when it arises, it can add up quickly. One small issue like 3338 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 3338 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Similar SPN Codes :

Truck List With 3338 SPN Code :

SPNFMI Faults and Engine error code check tool. SPN code listing with names and descriptions.

About Us | Contact | Privacy

Copyright 2021 - © SPNFMI.com