5512 SPN Fault Code

Name:

Lubrication Operation Mode Set Command

Description:

Command signal to change lubrication system operational mode. The mode set command gives the operator and/or technician the ability to change the operational mode when diagnosing and servicing of the system is required.Automatic is the normal operation mode of lubrication system. In this mode the operator has the privilege to change duty cycle mode, if the lubrication mode in not locked. In manual service mode the service tool temporary takes control of the pump controller for service purposes. The Test mode # x shall command the system to perform pre-defined greasing cycles in order to verify operation of the lubrication system. 000b = Automatic Mode 001b = Manual Service Mode 010b = Test Mode # 1 011b = Test Mode # 2 100b = Test Mode # 3 101b to 110b = Reserved 111b = Take no action

5512 spn fault code name is Lubrication Operation Mode Set Command. If you don't take the time to look into 5512 spn fault when it arises, it can add up quickly. One small issue like 5512 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 5512 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

5512 SPN Fault Code

Name:

Description:

Similar SPN Codes :

Truck List With 5512 SPN Code :