Scania P 220 7585 SPN Fault Code

Name:

Tire Location

Description:

The location of monitored tire that corresponds with the tire sensor identification number SPN 7586. In order to specify the monitored tire by tire number, use the tire number SPN 7584.The high order 4 bits indicate the vehicle axle position of the tire sensor, counting front to back on the vehicle, with the value 0 representing the front axle on the vehicle. The low order 4 bits indicate the position of the tire sensor along the axle, counting left to right when facing in the direction of normal vehicle travel (forward), with the value 0 representing the left most tire sensor position on the axle. The value FFh indicates not available. It is recommended that output devices add 1 to the position number (range 1 to 15, not 0 to 14) for use by drivers and service technicians. Examples: Tire Sensor 1 location of 00h indicates Tire Sensor 1 is the left front tire sensor. Tire 1 Sensor Location of 23h indicates Tire Sensor 1 is on the 3rd axle, 4th tire from the left.

Scania P 220 7585 spn fault code name is Tire Location. If you don't take the time to look into Scania P 220 7585 spn fault when it arises, it can add up quickly. One small issue like Scania P 220 7585 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of Scania P 220 7585 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

Scania P 220 7585 SPN Fault Code

Name:

Description:

Similar SPN Codes :