3156 SPN Fault Code

Name:

Blade Control Mode Switch

Description:

Indicates the blade control mode switch state the user has set for the land leveling system. The switch value directly correlates to the current switch state, regardless of the switch being used. This parameter is intended for use in systems using only one parameter to control the blade movement (i.e. elevation). Systems using two independent parameters to control blade position, i.e. one blade edge maintains a constant elevation and the other blade edge maintains a constant blade angle, should use parameters specific to that usage. Only one of the following states will be active at a time. Below are the data values defined for each switch type that may be used in this application. The purpose of the following switch information is to define what data should be reported based on what type of switch is used.1. A toggle button with two states can be used, in which the button is either in the manual or the auto position at all times. Toggle button usage is as follows: Manual Position = 00

3156 spn fault code name is Blade Control Mode Switch. If you don't take the time to look into 3156 spn fault when it arises, it can add up quickly. One small issue like 3156 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 3156 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

3156 SPN Fault Code

Name:

Description:

Similar SPN Codes :

Truck List With 3156 SPN Code :