5408 SPN Fault Code

Name:

Blade Control Mode � Right

Description:

Indicate if the land leveling system�s automatic control is active or inactive for the elevation sensor on the right side of the blade. The � left � notation is applicable to grading machines such tractors and motor graders where � right � is the position of the elevation sensor as seen by the operator.If the right sensor is not installed, then the value communicated should be � 1111b �. For systems with a single elevation sensor, the system should be flexible enough to be configured in a manner which most accurately represents what is installed on the machine. Manual: Operator controls the position of the blade as normal Auto: The grade control system is controlling the position of the blade without operator input Inactive Auto: An operating condition exists which prevents the grade control system from allowing automatic controls to engage. This would include conditions such as laser signal is not detected, but not faulty components. Error: A fault exists in the system. 0000b = Manual

5408 spn fault code name is Blade Control Mode � Right. If you don't take the time to look into 5408 spn fault when it arises, it can add up quickly. One small issue like 5408 can cause a larger component to become damaged without taking the time to investigate. If you suspect your truck is suffering from one of these issues, look into replacing those small components to save money down the road.

Note: The name and description of 5408 code represents text descriptions for faults supported by another coding system and does not necessarily comply with SAE J1939. For a specific engine manufacturer's explanation for codes, please consult the engine's technical manual. See also other spn codes.

5408 SPN Fault Code

Name:

Description:

Similar SPN Codes :

Truck List With 5408 SPN Code :